12 Head Flare Machine

This is a vertical flare producing machines, which includes proceeding as preheating, heating, molding, cooling, cut marking, laring cutting by hydrogen and oxygen flame and annealing at the annealing pan.

32 Head Stem Machine

This machine can automatically feed the lead wire, flaring tube and exhausting tube and then heat them to become stem

24 Head Filament Stretch Machine

This machines is used to mount the filament to the stem

Sealing & Exhausting Machine

This machine is capable for both sealing and exhausting. And it is desighn for 5-40W, 110-220V GLS decorative lamps.

60 Head Capping & Finishing Machines

This machine is the last part of automatic GLS production line, which is settled and design for heating the base and fix the base to the bulb.

Fluorescent Lamps Producing

75 Head Coating Machines

This machine is used to automatically coat the fluorescent powder inside the glass tubes and then heat the tubes to dry

82 Head Baking Machine

This is an automatic machine, which can firstly coat the glass tubes, then head the tubes by downward radiation heating with gas flame, and cool the tubes at last

12 Head Flare Machine

This machine is a vertical feeding flare machine, including preheating, heating, molding, cooling, cut marking, flaring cutting by hydrogen and oxygen flame and annealing at the annealing pan.

32 Head Stem Machine

This machine can automatically feed the lead wire, flaring tube and exhausting tube and then heat them to become stem

24 Head Filament Mounting Machine

This Machine is used to stretch and the protective ring the filament to the stem

36 Head Sealing Machine

Machine is suitable for sealing of difference length fluorescence tubes, which seal both ends with remainder. the stems with filament are fed automatically from conveyer, then heated, sealed, automatic reversed and the taken out.

48 Head Exhausting Machine

The machine is designed to produce the high efficiency fluorescence tubes. And controlled by advanced computer. sealed tubes will follow these procedures: heating, exhausting, filament decomposing, Argon flushing, quantitative mercury enclosing and Krypton & Argon sealing.

Cement Filling Machine

This machine is designed to automatically fill the cement into caps before the caps are fixed to the sealing tubes

96 Head Aging Machine

This machine is chiefly used to make the final check of fluorescence tubes. The procedure includes aging procedure for quality stability, such as warming up, adding high voltage, polarity switching, etc.